Bandsaw-Blades

Excellent Japanese Material & Technology

Recognised as the leading industrial band saw brand in South East Asia, TBS band saw is made of Daido Japan’s excellent material & technology. TBS Band saw blades has several key features and unique selling points (USP) including:

Absolute flatness, Stable Straightness,  Homogeneous Surface,  Reduced Machining Time, Quick Saw-doctoring.

Using Nickel as a core constituent, TBS band saw offers superior cutting performance and a long lifespan that is unrivalled by other brands. All this is backed by by more than 70 years of TBS proud history of making quality bandsaw with support from Daido’s steel plant.

A Matter of Safety and Performance

The long-lasting superior cutting quality of TBS band saw blades is due to its high adrasion resistance, which is in proportion to tooth hardness. Excessive hardness, however, results in cracking, less toughness, and difficulty in swaging. TBS band saw blade is heat-treated to reconcile these conflicting requirements and provides appropriate toughness and hardness.

In addition, band saw blades are required to have high fatigue strength and impact resistance because they are subjected to high speeds and long periods of rotation. Proper heat treatment is vital to these qualities as well as to additional requirements including the control of impurities, segregation which can arise during the steel making process, and uniform grinding free from surface defects. Deleterious inclusions and a high degree of segregation may cause lowering of saw quality. TBS band saw blade is made of steel with high purity and uniform structure under Daido’s superior steel making technology, and exhibits high fatigue strength and durability.

The reliability of TBS band saw blade is the result of advanced quality control of steel making up to the final inspection by Daido Steel Co., Ltd., the world’s leading special steel manufacturer.

Steel Grades &  Chemical Composition

Grade Main chemical composition(%)
Carbon(C) Silicon(Si) Manganese(Mn) (Nickel)Ni Chromium(Cr)
SUBN15 0.75 0.30 0.40 2.10 0.15
Edge Square
Surface Bright polished
Flatness Width ≦0.1%
Thickness(mm) BWG Hardness
0.80-1.20 21-19 434~460 HV(30)
1.25-1.47 18-17 44.0~46.0 HRC
1.65-1.98 16-[0.078] 43.0~45.0 HRC

Sizes Available

Bandsaw Width Thickness Tooth Pitch Length per Coil
3 inches 20 BWG 1¼ inch 100 metres
4 inches 20 BWG 1¼ inch 100 metres
4 inches 19 BWG 1    inch 100 metres
4 inches 19 BWG 1¼ inch 100 metres
4 inches 18 BWG 1    inch 100 metres
4 inches 18 BWG 1¼ inch 100 metres
4½ inches 18 BWG 1    inch 100 metres
4½ inches 18 BWG 1¼ inch 100 metres
5 inches 18 BWG 1¼ inch 100 metres
5 inches 18 BWG 1½ inch 100 metres
6 inches 18 BWG 1¼ inch 105 metres
6 inches 18 BWG 1½ inch 100 metres
7 inches 18 BWG 1½ inch 105 metres
8 inches 17 BWG 1¾ inch 105 metres
Advertisements